DIY: Using Applicator Bottles

Applicator bottles make doing henna easy - even for beginners!

1. Attach the metal tip.
   Secure the tip to the coupler with a half turn.
2. Prepare your henna cones.
   Knead the henna well to make sure there is no separation. Cut a wide opening in the tip to make it easier to squeeze into the bottle.
3. Fill the applicator bottle. 
   Fill half way then tap and squeeze the bottle to let the henna settle and remove air pockets. Repeat this until the bottle is COMPLETLEY filled.
4. Put the coupler and tip on the bottle.
   Screw on the coupler and tip on the bottle and you are ready to henna!

TIPS:

• Tap the BOTTOM of the bottle frequently while filling to eliminate air pockets, ensuring smoother application.
• Regularly refill the bottle. A fuller bottle requires less pressure to squeeze out the henna.
• Remember, smaller tips require more effort to squeeze. Use a combination of speed and pressure for thinner lines, even with larger tip sizes. If you're new to this, it's best to avoid starting with the smallest tip size.